Alarm Description - Autool Em355 Benutzerhandbuch

Alarm
description
battery will first undergo a restoration process. When selecting
the fast charging mode, the battery type must be selected to
output different charging voltages and currents.
● Battery Not Connected Prompt: If the battery clamps are
properly connected and the battery voltage is above 10.8V, but
the system still displays a "Battery Not Connected" prompt, it is
recommended to first remove the battery clamps, clean the
battery terminals, and then reconnect them. If the issue
persists and the system still indicates that the battery is not
connected, please disconnect the power and contact our
after-sales service for further assistance.
● Temperature Abnormality Prompt: If a "Temperature Abnor-
mality" prompt appears, first remove the battery clamps
without turning off the device's power switch. Allow the built-in
fan to cool the system. After a short period, when the tempera-
ture lowers, the system will automatically cancel the alarm and
return to the normal interface. If the "Temperature Abnormali-
ty" prompt appears immediately after powering on, even when
the device is not hot, do not continue using the device. Please
contact our after-sales service for assistance.
Battery Not Connected
Temperature Abnormality
11