Warning - Autool Em355 Benutzerhandbuch

Warning

Damage to the connection cables and excessive dust inside
the machine may pose risks such as electric shock, short
circuits, or fires.
Never attempt to disassemble, repair, or modify this equipment
on your own, as this could result in electric shock or fire
hazards.
Ensure proper grounding. Failure to ground the equipment
may result in electric shock if leakage occurs.
Stop the operation in case of abnormalities. If unusual smells,
noises, excessive heat, or smoke occur, continuing operation
may lead to electric shock or fire.
Never allow water, any other liquids, or (flammable) cleaning
agents to enter the equipment, as this could cause electric
shock, short circuits, and potentially a fire.
Operating errors may result in personal injury and pose a risk
of damage to items!
After the equipment is turned on, the fan runs for 2 minutes and
then stops. This is a self-test setting in the program.
The operating temperature of the equipment's display screen
is: -20~70°C.
Warning! There is a risk of damage if the battery overheats. Do
not charge the battery in environments where the temperature
exceeds 36°C. This may cause the battery temperature to rise
to 45°C. If the battery temperature exceeds 45°C, please
disconnect the device immediately.
Attention! The repair mode may damage automotive electronic
components. Before using the repair mode, remove the battery
from the vehicle. The success of the repair depends on the
degree of battery sulfation.
Use repair mode with caution, as it may cause fluid loss or
drying of the battery.
Ensure that the battery is charged at room temperature, the
battery capacity is correctly set, and the vehicle's electrical
system and battery are disconnected. For repair charging,
remove the battery from the vehicle and place it in an open (not
exposed to direct sunlight) or well-ventilated area.
7