Product Description; Important Usage Instructions; Operation Mode Description - Autool Em355 Benutzerhandbuch

PRODUCT DESCRIPTION

Important
usage
instructions
Operation
mode
description
● When connecting the battery and the machine, make full use
of the clamp length and try to keep the machine and battery at
a distance.
● Never place the machine directly on the battery.
● Keep the machine dry and well-ventilated.
●
Ensure both the power supply and battery clamps are properly
connected.
●
During normal charging, if you need to stop charging, press the
confirm/stop button first, then disconnect the clamps. Avoid
turning off the power by unplugging the socket directly.
●
Charging the battery fully may take a long time. Please be
patient. To achieve a better fully charged state, a long period of
low current float charging will be required.
●
Batteries with internal short circuits should not be charged, as
this could be dangerous.
●
Always ensure the charging process is monitored.
Before powering on, please ensure the voltage is normal, the
socket is suitable, and the battery is visually intact. Depending on
the required function, please operate correctly and select the
appropriate working mode.
● Programming Power Mode:
When system programming or decoding is required for the
vehicle's ECU, provide a stable voltage source to the vehicle.
At this time, ensure the battery is fully charged to avoid voltage
instability caused by charging. This function allows adjustment
of the programming voltage as needed, with a voltage range
from 10.8V to 16.0V. Please operate correctly and adjust to the
appropriate voltage.
Fast Charging Mode:
●
Under normal conditions, battery charging includes both
charging the battery and battery restoration. For batteries that
have been stored for an extended period or have insufficient
voltage, battery restoration mode may be necessary. The
10