Autool EM355 Benutzerhandbuch Seite 16

● Restoration Complete Notification: When using the battery
restoration function, the system will automatically end the
battery restoration process and display a "Battery restoration
Complete" message when the charging voltage reaches
14.6V, a float charge of 2 hours is completed, and the current
is less than 1A.
● Restoration Failure Notification: When using the battery resto-
ration function, for batteries with insufficient voltage, after 0.5
hours of restoration, the battery will be discharged. If the
battery voltage drops by more than 2V, or if after 1 hour of
restoration the voltage has not risen to 9V, the system will
automatically end the restoration process and display a
"Battery Restoration Failed" message.
● Battery Does Not Need Restoration Prompt: When using the
battery restoration function, if the system detects that the
battery voltage is greater than 12.6V at the start of the resto-
ration process, it will assume the battery is healthy, terminate
the restoration, and display a prompt indicating that the battery
does not need restoration.
Restoration Completed
Restoration Failed
No Battery Restoration Required
15