HOMCOM W914-18F Bedienungsanleitung Seite 13

: Changing the flame color: There are three types of flame effects – keep
pressing this button until you reach the desired color.
: Flame effect function
- Press this button to change the flame effect.
- Press the button again to decrease the flame intensity. There are five
intensities to choose from.
- The flame optics will lower in intensity in the sequence of 5, 4, 3, 2 and 1.
- Press the button again to increase the flame intensity in the sequence of 1, 2,
3, 4 and 5.
NOTE: After the display screen is turned off, it can be activated by pressing
any button.
NOTE: In the absence of the timing mode, you can press + or - to select the
desired temperature. Once the desired ambient temperature is reached, the
heater will automatically stop heating.
Fast heating:
+
Maintenance:
WARNING: Before performing any maintenance or cleaning, turn off and unplug the
appliance to reduce the risk of fire or electric shock. It is recommended to have
maintenance tasks carried out by a qualified technician.
Cleaning:
CAUTION: Before cleaning, wait for the appliance to completely cool down.
Cleaning glass panel:
- Use a dry cloth to remove dust.
- Use a damp cloth to remove fingerprints and other marks from the glass door.
- Do not use abrasive cleaners or liquid sprays on glass door surfaces.
- Clean metal and metal-painted parts with a damp cloth only. Do not use abrasive
cleaners or liquid sprays on these surfaces.
Electrical parameter
• Power supply: AC220-240V
• Frequency: 50-60Hz
• Power: 1800W
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
：To activate immediate heating, press the standby button
and the heating button simultaneously.
12