PowerLocus Universe Bedienungsanleitung Seite 4

Bluetooth connection after 5 minutes, the LED Indicator Light
begin to ash BLUE and WHITE for 60 seconds. The headphones will
then automatically turn off by con rming with 'Power off' and the LED
Indicator Light 9 will ash White once and then switch off.
Wired mode**
The headphones are suitable for devices with a 3.5mm audio socket.
Insert the 3.5mm audio cable into the 3.5mm Audio Port
headphones and the other end into your phone or plane's 3.5mm
socket to start listening to your music or movie.
*3.5mm audio cable available separately.
** Note: ANC mode is not avaialble when using a 3.5mm cable to
connect the headphones.
Operations
Play / Pause
Short press Call / Play / Pause Button
Volume Up / Down
Short press
the Volume Up / Down Buttons
Skip / Previous Track
Press and hold
the Skip / Previous Track Buttons
Active Noise Cancellation (ANC) On
/ Off and Transparent Mode
Short press the ANC button
following modes: TRANSPARENT MODE > ANC ON >
ANC OFF. You will hear a voice announcement telling you
which mode you are in: 'Transparent On', 'ANC On' or
'ANC Off'. The ANC LED light
either Transparent mode or ANC mode is being used.
Change the Preset Equalisation (EQ) Settings
Choose from Equalisation (EQ) modes to suit your personal
preference. There is no App required.
• Bass boost mode increases the bass sound.
EN
9 will
11 of your
5
/ to adjust the volume
4 6
4 / 6 to change tracks
to cycle through the
8
7 will glow GREEN while
3
Short press
the EQ button to cycle through the Music and Bass Boost.
13
Answer / End a call
Short press the Call Button
(Audio is picked up via the microphones
Power On / Off
Press and hold
the multi-function button 5
on / off'.
How to Reset?
Press and hold the + and – button for 6-7 seconds until the
LED lights start ashing again in Blue/White.
Please
Recycle
Disposal of waste batteries and
electrical and electronic equipment
(applicable in the European Union
and other countries with separate
collection systems) This symbol on
the product, the battery or on the
packaging indicates that the
product and the battery shall not be
treated as household waste. On
certain batteries this symbol might
be used in combination with a
chemical symbol. The chemical
symbol for lead (Pb) is added if the
battery contains more than 0.004%
lead. By ensuring that these
products and batteries are disposed
of correctly, you will help to prevent
potentially negative consequences
for the environment and human
health which could be caused by
inappropriate waste handling. The
recycling of the materials will help to
conserve natural resources. In case
of products that for safety,
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by quali ed service staff
EN
5 .
.
12
on / off. You will hear 'Power
only. To ensure that the battery and
the electrical and electronic
equipment will be treated properly,
hand over these products at
end-of-life to the appropriate
collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view
the section on how to remove the
battery from the product safely.
Hand the battery over to the
appropriate collection point for the
recycling of waste batteries. For
more detailed information about
recycling of this product or battery,
please contact your local Civic
Of ce, your household waste
disposal service or the shop where
you purchased the product or
battery.
LET'S BE SAFE
IT IS IMPORTANT THAT YOU
PLEASE READ THIS SECTION
COMPLETELY.
To avoid hearing damage, limit the
time you use headphones at high
volume and set the volume to a save
level. The louder the volume, the
shorter the safe listening time is.
If water or foreign matter enters the
4