Master Lock SentrySafe Fire-Safe SEC37153 Bedienungsanleitung Seite 3

WARNING
Gun warning
This product is not intended for the secure storage of all materials. Items such as firearms, other weapons, combustible materials, or medication
should NOT be stored in this unit.
NOTICE
Do NOT store delicate items directly in your safe.
SentrySafe / Master Lock products which offer fire protection have a proprietary insulation that has a high moisture content. In addition, the
SentrySafe / Master Lock advanced safes close airtight to offer water resistance, which may also cause moisture to accumulate inside your safe. The
desiccant packet included in your safe during shipment should be left in your safe. DO NOT DISCARD IT. It is
intended to help absorb moisture which may accumulate inside your safe. Please open your unit once every two weeks to avoid moisture
accumulation.
If you choose to store delicate items such as jewelry with working parts, watches, stamps, or photos in your safe, we recommend putting them in an
air-tight container, prior to placing them in the safe for storage.
NOTE: SentrySafe / Master Lock Lock will not be responsible for any damage or loss of items placed in the unit due to moisture.
Do NOT store pearls in this safe.
In the event of a fire, potential damage to delicate pearls occurs at temperatures much lower than the 177°C interior performance measure which
the UL classification performance standard indicated guarantees. Therefore, DO NOT store pearls in your SentrySafe / Master Lock product.
Do NOT store magnetic media or photo negatives.
This product is not intended to protect magnetic media or photo negatives.
Your safe is only part of your total security protection.
SentrySafe / Master Lock recommends that you store your safe in closets, offices, basements, bedrooms and any other locations that are convenient
for you but out of direct line of sight from prying eyes. The location of the safe does not affect the safe's ability to protect your valuables inside.
IMPORTANT
If you experience any problems or challenges with your safe, please contact us. Many issues can be resolved quickly without the
product being returned.
Visit www.masterlock.eu or www.sentrysafe.com
Registration:
www.registermysafe.com
Reasons to register
By registering your SentrySafe / Master Lock product you can easily retrieve forgotten codes and combinations.
By registering your SentrySafe / Master Lock product you can be sure that in the unfortunate circumstance of a fire you will be guaranteed
your replacement safe
(provided official paperwork).
2
Mechanical Combination Lock
NOTE: • Store combination (and keys if
equipped) in a secure location
(other than in the safe).
• Combination can not be changed.
Preparing your safe for first time use
• DO NOT RETURN! Questions or concerns,
FPW082TEST
visit www.masterlock.eu or
SN100TEST01*
www.sentrysafe.com
10-22-33
RLR
Find your combination on the back of this
2075
owner's manual.
FOR SAFES WITH OVERRIDE KEY ONLY
Keys are shipped outside of the safe. Be sure to locate them before
locking your safe.
WARNING
Test your combination several times before putting
valuables inside.
Unlocking your safe using the override key only
(for select models)
Insert key into the cylinder, turn to the
1
'unlocked' position.
Pull handle outward to open the door.
2
Unlocking your safe using the combination dial
Rotate dial to '0', then rotate right
1
(clockwise) passing '0' three times,
continue rotating until you reach the first
number in your combination.
Rotate dial to the left
2
(counterclockwise). Go PAST the second
number of your combination ONCE and
stop the SECOND time the dial reaches
the number.
Rotate the dial to the right (clockwise),
3
stop when you reach the third number
in your combination.
Pull handle outward to open the door.
4
Locking your safe using the override key
(for select models)
Close the door to re-engage locking
1
bolts.
Turn key to the 'locked' position.
2
Locking your safe using the combination dial
Close the door to re-engage locking
1
bolts.
Spin the dial at least 2x to the right
2
(clockwise)
to scramble the lock.
NOTE: • Safe will not lock until the combination dial is
scrambled.
• Safe will not lock unless key cylinder is turned to the
locked position.
3