Cybex Platinum ANORIS T2 i-SIZE Bedienungsanleitung Seite 37

BATTERY MANAGEMENT
(3) (3)
Depending on the battery life and usage behaviour, it may be nec-
essary to change the batteries. If the batteries are empty, the airbag
and the indicators and warning signals are not active.
A warning signal indicates that the batteries must be replaced.
To change the batteries, you have to open the battery compartment
(3) with a suitable tool. After changing the batteries, this compart-
ment must be closed again. The Battery indicator on the display
panel will light up GREEN. If the display panel does not light after
exchanging the batteries please contact the retailer or manufacturer.
Only use the recommended type CR17450 batteries (3V DC).
• Do not reverse the positive and negative terminals when
mounting.
• Only use identical and new batteries without damage.
• Always remove the empty batteries.
• Keep all batteries out of reach of children.
• Do not charge the batteries.
• Do not subject the batteries to severe shock.
• Never expose this product or the batteries to fire.
• Do not store the batteries in a hot and humid environment.
• Do not disassemble the batteries. Do not short-circuit the
batteries.
EN
37