osann One360 Bedienungsanleitung Seite 31

1 . Press the two lateral Isofi x connector buttons in order to extend the length of the Isofi x con-
nectors.
2 . Guide the Isofi x connectors onto the Isofi x anchor points on the seat of the vehicle and ensure
that they lock into position.
3 . Push the child car seat in until it rests securely against the backrest of the seat of the vehicle.
Press again individually on the left and right side of the child car seat and make sure that the
connectors are fully engaged and that the child seat does not wobble. Ensure that both Isofi x
indicators are showing green.
4 . Take the top tether out of the storage bag and extend it to its full length.
5 . Clip the top tether onto the hook provided in your car (e.g. on the back of the car seat or in the
boot. Please consult your car manual for this).
6 . Tighten the top tether until the display on the top tether turns green.
7 . Unfasten the belt buckle on the child car seat and place the belts on the outside of the seat.
8 . Put your child in the child car seat.
9 . Adjust the height of the headrest as described above.
10 . Fasten the belt buckle again until you hear a click.
11 . Pull the front adjustment strap to tighten the belts. Ensure that the straps are not twisted.
12 . When facing in the direction of travel, the child car seat offers four adjustable seat positions.
- 31 -
EN