Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Storage Sled Specifications (Per Sled)
HDD Sled Configuration
Dual port mode (redundant)
Single port mode (non-redundant)
Expansion mode (non-zoning/
two zone/four zone)
Storage device
Standard carrier
Flexible carrier
Expansion carrier
Interface
Mini-SAS
Power Sled Specifications (Per Sled)
Interfaces
Power LED
Power connector
Power supply module (per power supply)
Wattage
Connector
Voltage
Heat dissipation
Maximum inrush current
38
Getting Started With Your System
Standard carrier
• Standard carrier
• Flexible carrier
• Expansion carrier
Expansion carrier
3.5-inch SAS/SATA/SSD HDD x 12
2.5-inch SAS/SATA/SSD HDD x 12
2.5-inch SSD HDD x 24
4 front
2 front
2 DC connector (12 V & GND)
1400 W
IEC C20
200–240 V AC, 50–60 Hz, 9 A max
1205 BTU/hr. maximum
Under typical line conditions and over the
entire system ambient operating range, the
inrush current may reach 25 A per power
supply for 10 ms or less
Werbung
Inhaltsverzeichnis
