Herunterladen Inhalt Inhalt Diese Seite drucken
Staubli MA710 Montageanleitung

Staubli MA710 Montageanleitung

Pv-kupplungsstecker pv-kst4/13ii-ur
MA000 (de_en)
MA710 (de)
Montageanleitung
Montageanleitung
PV-Kupplungsstecker PV-KST4/13II-UR
PV-Kupplungsbuchse PV-KBT4/13II-UR
Inhalt
Sicherheitshinweise ���������������������������������������������������������������������2
Hinweise zur Installation ���������������������������������������������������������������3
Werkzeug ����������������������������������������������������������������������������������� 5
Lagerung ������������������������������������������������������������������������������������ 6
Vorbereitung der Leitung ������������������������������������������������������������� 7
Crimpen ������������������������������������������������������������������������������������� 8
Anleitung zur Kalibrierung ����������������������������������������������������������� 9
Montage-Prüfung ��������������������������������������������������������������������� 10
Stecken und Trennen der Leitungskupplung ������������������������������11
Technische Daten ��������������������������������������������������������������������� 12
Produktübersicht
1
Buchse
1
Socket
Kontakt
2
Contact
Optionales Zubehör
Buchsen-Schutzkappe
5
Socket sealing cap
PV-KBT4/13II-UR
5
PV-BVK4
MA710 (en)
MA000 (de_en)
Assembly instructions
Assembly instructions
PV male cable coupler PV-KST4/13II-UR
PV female cable coupler PV-KBT4/13II-UR
Content
Safety Instructions �����������������������������������������������������������������������2
Notes on installation ��������������������������������������������������������������������3
Tools ������������������������������������������������������������������������������������������ 5
Storage �������������������������������������������������������������������������������������� 6
Cable preparation ����������������������������������������������������������������������� 7
Crimping ������������������������������������������������������������������������������������� 8
Gauging instructions ������������������������������������������������������������������� 9
Assembly check ����������������������������������������������������������������������� 10
Mating and disconnecting the cable coupler ������������������������������11
Technical data �������������������������������������������������������������������������� 12
Product overview
3
2
Stecker
3
Plug
Kontakt
4
Contact
Optional accessories
Stecker-Schutzkappe
6
Plug sealing cap
PV-KST4/13II-UR
6
PV-SVK4
4
1 / 12
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Staubli MA710

  • Seite 1: Inhaltsverzeichnis

    MA000 (de_en) MA710 (de) MA000 (de_en) MA710 (en) Montageanleitung Montageanleitung Assembly instructions Assembly instructions PV-Kupplungsstecker PV-KST4/13II-UR PV male cable coupler PV-KST4/13II-UR PV-Kupplungsbuchse PV-KBT4/13II-UR PV female cable coupler PV-KBT4/13II-UR Inhalt Content Sicherheitshinweise ���������������������������������������������������������������������2 Safety Instructions �����������������������������������������������������������������������2 Hinweise zur Installation ���������������������������������������������������������������3 Notes on installation ��������������������������������������������������������������������3 Werkzeug �����������������������������������������������������������������������������������...
  • Seite 2: Sicherheitshinweise

    Do NOT modify or repair component Steckverbinder nur einmal montieren� Mount connectors only once� • • Steckverbinder nach der Montage NICHT nachträglich modifi zieren� Do NOT modify connectors after assembly� • • Defekte Steckverbinder austauschen� Replace defective connectors� • • 2 / 12 MA710...
  • Seite 3: Hinweise Zur Installation

    Sicherstellen, dass der Steckverbinder nicht in stehendem Was- • Do not allow cable ties to be mounted directly on the connector • ser steht� body� Sicherstellen, dass die Kabelbinder nicht direkt am Steckverbin- • dergehäuse befestigt werden� MA710 3 / 12...
  • Seite 4: Mechanische Beanspruchung

    (z� B� in großen Bündeln, in geteilten Kabelbäumen oder ande- les, in split cable harnesses or other housings) is not permitted� ren Gehäusen), ist nicht zulässig� Direct burial of the connector is not permitted� • Eine direkte Installation im Erdreich ist nicht zulässig� • 4 / 12 MA710...
  • Seite 5: Werkzeug

    (ill. 5) (ill. 5) PV-PST Prüfstift Test plug PV-PST Bestell-Nr� 32�6028 Order No� 32�6028 (ill. 6) (ill. 6) Kabelschere PV-WZ-KS, Cable cutter PV-WZ-KS, Bestell-Nr� 32�6080 Order No� 32�6080 Hinweis: Note: Bedienungsanleitung MA705, Operating instructions MA705, www�staubli�com/re-downloads�html www�staubli�com/re-downloads�html MA710 5 / 12...
  • Seite 6: Lagerung

    Komponenten nicht mit Säuren, Laugen, Gasen, Aceton oder Do not allow components to come into contact with acids, • • anderen chemisch aggressiven Substanzen in Verbindung alkalis, gases, acetone or other chemically aggressive sub- setzen� stances� 6 / 12 MA710...
  • Seite 7: Vorbereitung Der Leitung

    Class B and C stranded copper conductors (See NFPA NEC mit mehrdrähtigen Kupferleitern der Klassen B und C geeignet 70, Chapter 9, Table 10, Edition 2023)� (siehe NFPA NEC 70, Kapitel 9, Tabelle 10, Ausgabe 2023)� MA710 7 / 12...
  • Seite 8: Crimpen

    Insert the stripped cable end until the • • Litzen der Leitung am Klemmbügel lead strands come up against the anschlagen� clamp� (ill. 12) (ill. 12) Crimpzange ganz schließen� Completely close the crimping pliers, • • until the ratched releases� 8 / 12 MA710...
  • Seite 9: Anleitung Zur Kalibrierung

    Sie können zudem einen ‚No-go‘ Stift mit einem Durchmesser von This pin may partially enter the indenter opening, but must not pass �1520‘‘ verwenden� completely through the the opening� Dieser Stift kann teilweise in die Indenter-Öffnung eindringen, darf aber nicht vollständig durch die Öffnung hindurchgehen� MA710 9 / 12...
  • Seite 10: Montage-Prüfung

    For assembly of components an Montage der Komponenten sollte ambient temperature between -15 °C zwischen -15 °C und 35 °C liegen and 35 °C is recommended� >0 Hinweis: Note: Hutmutter nicht auf Block verschrauben� Do not bottom out the capnut� 10 / 12 MA710...
  • Seite 11: Stecken Und Trennen Der Leitungskupplung

    The correct mating has to be verified� Die korrekte Montage ist in jedem Fall zu überprüfen� (ill. 19) (ill. 19) Trennen: Disconnecting: Zum Entriegeln Montage- und Entrie- Use assembly and unlocking tool to • • gelungsschlüssel verwenden� disconnect� MA710 11 / 12...
  • Seite 12: Technische Daten

    100 Market Street Stockbrunnenrain 8 Windsor, CA 95492/United States 4123 Allschwil/Switzerland Phone +1 707 838 0530 Tel. +41 61 306 55 55 +1 707 838 2474 +41 61 306 55 56 mail ec.us@staubli.com mail ec.ch@staubli.com www.staubli.com/electrical www.staubli.com/electrical 12 / 12 MA710...

Inhaltsverzeichnis