Sicherheitshinweise Safety instructions Diese Montageanleitung und die darin beschriebenen Monta- These assembly instructions and the assembly steps and in- geschritte und -hinweise sind Bestandteil bzw. Voraussetzung structions described are an integral part of and prerequisite for Die Montage und Installation der Produkte darf ausschliess- The assembly and installation of the products must only be Berücksichtigung der Errichternorm DIN VDE-0100-712 (IEC in compliance with the installation standard DIN VDE 0100-...
Installation of this product ini the United States must Installation of this product ini the United States must be done in accordance with the National Electric be done in accordance with the National Electric Code, and either be installed in an in-accessible loca- Code, and either be installed in an in-accessible loca- tion or in a NEC-compliant raceway.
Technische Daten Technical Data Test voltage Test voltage Safety class Mating connectors Mating connectors Flammklasse Flame class Isolationsmaterial Contact material Contact resistance Current rating / ambiant temperature Current rating / ambiant temperature 10 A 15 A 15 A 50 A 4 / 8 4 / 8...
Note: Zur Bedienung siehe Produkt- For proper use of this tool, please Montageanleitung MA231 refer to the product assembly inst- www.staubli.com/electrical ructions MA231 www.staubli.com/ electrical (ill. 2) (ill. 2) (when connected to PV-KBT4-EVO 2… (when connected to PV-KBT4-EVO 2… or PV-KST4-EVO2… “MC4 EVO2”...
Seite 7
MIN. MIN. (ill. 4) (ill. 4) It is very important during installation not to constrain the It is very important during installation not to constrain the cable connectors in such a way that the cables are not allowed cable connectors in such a way that the cables are not allowed should be ensured prior to any cable bending.