EuroLite LED IP Mega PIX Strobe 714 Swing Bedienungsanleitung Seite 31

XLR connection:
OPERATION
After connecting the unit to the mains it requires a short initialization process and is then ready for operation.
The display indicates the last operating mode. The operating modes can be selected by means of the display
and the control buttons. All settings remain stored even if the device is disconnected from the mains. The
device can be operated in stand-alone mode via the control board or in DMX-controlled mode via any
commercial DMX controller.
Operating buttons
Button
MENU
ENTER
UP
DOWN
Menu structure
Default settings shaded
Display Submenu 1
DMX
Tilt
Tilt
Speed
Master
Blinder W
Strobe
RGBW
Strobe
Red
Manual
Green
Blue
White
Blinder
white
Macro
Macro
Speed
Function
Returns to the initial screen.
Activates a value to be modified, enters a submenu or saves a value when
modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Submenu 2
001 – 512
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 255
Description
Starting address
Tilt position
Tilt speed
Master dimmer
Blinder white LEDs strobe speed
RGBW LEDs strobe speed
Intensity Red, 0=off, 1-100%
Intensity Green, 0=off, 1-100%
Intensity Blue, 0=off, 1-100%
Intensity White, 0=off, 1-100%
Intensity, Blinder white, 0=off, 1-100%
Color macros (0~20 > no function)
Macro speed , fast > slow
31/44 00160417, Version 1.0