Aiper Scuba N1600 Bedienungsanleitung Seite 133

3. Remove any debris entangled in the
propeller.
5. Align the A, B, and C clips on the drain cover with those on the device. Insert the A
and B clips of the drain cover into the device, and then press down on the C clip
until it is securely fastened.
C
A
B
4.3 Replacing the
Caterpillar Tread
1. Remove the side cover plate from
the device: Lay the device on its
side, remove the 4 clips on the side
cover plate with the flathead
screwdriver, and pull out the side
cover plate upwards.
4. After cleaning the propeller,
reattach the propeller cover.
C
1
A
B
130
2