Werbung
Verfügbare Sprachen
Verfügbare Sprachen
22) Attach tongue jack as pictured below. There are two bolts that hold it securely to the tongue.
The leg stand can be used when the processor is in operation.
6. Operation
6.1. Preparations
Place the machine on a flat and stable surface. Check all oil levels and fill up if necessary. Check that
the machine does not have any defects. Remember to use proper protective equipment.
6.2. Operating
Adjusting the log length
The log length stop is adjusted with two screws. Unscrew these, move the allocation to the desired
position and tighten the screws to adjust the log length.
Werbung
