Werbung
Multi Cyclone Vacuum Cleaner
WARNING – Danger of Fire!
■
Do not cover the device during operation
in order to prevent it from catching fire.
Do not insert anything into the openings
of the device and make sure that they do
not become clogged.
NOTICE – Risk of Damage to Material
and Property
■
Make sure that the connecting cable is not
squashed, bent or laid over sharp edges.
■
Pull the mains plug out of the plug socket
if an error occurs during operation or
before a thunderstorm.
■
Protect the device from flames, persistent
moisture and impacts.
■
Use only original accessories from the
manufacturer in order to guarantee that
there is no interference that may prevent
the device from working and to avoid
possible damage.
■
Do not place heavy objects on the device
or the connecting cable.
REMOVING / INSERTING THE
VACUUM CLEANER BAG
Removing:
1. Open the lid: Press the release (11)
upwards.
2. Pull the holder (18) with the vacuum
cleaner bag vertically upwards out of
the device.
3. Pull the vacuum cleaner bag out of the
holder.
Inserting:
1. Insert a vacuum cleaner bag into the
holder (Picture E).
2. Insert the holder with the vacuum cleaner
bag back into the vacuum cleaner.
3. Close the lid. It must engage.
USE
Please Note!
■
The device should only be used if it has
been fully and correctly assembled! Vac-
uum cleaner bag and filters must be
inserted and must not be damaged!
If the dirt were to get inside the motor
unit, this could damage the motor.
■
Pull the connecting cable out of the
device at least up to the yellow marking.
Do not pull out further than the red
marking!
■
Replace the vacuum cleaner bag as soon
as it is full, i.e. when the suction power
diminishes or the dust bag replacement
indicator shows red.
1. Plug the connection piece of the suction
hose (2) into the suction opening (16)
on the device and turn it in a clockwise
direction as far as it will go.
2. Attach the suction nozzle you want and,
if necessary, the telescopic tube (1).
3. Plug the mains plug into a plug socket.
Switching on/off: Press the
•
switch (9).
Reducing the suction force: Open the
•
exhaust air valve (14) on the handle (13).
•
Winding up the cable: Press down the
switch (7). Hold the connecting cable
securely while doing this.
EN
On / Off
9
Werbung
