DeFelsko PosiTector DPM Gebrauchsanweisung Seite 12

Stream
Stream individual readings to a USB connected computer via a
serial protocol. Ideal for use with serial compatible SPC data
collection software.
For more information on USB Keyboard and
NOTE:
Streaming visit: www.defelsko.com/usb/stream
Keyboard
When enabled and connected to a computer, the PosiTector will
be recognized as a Keyboard. Readings are sent to the
computer as they are taken, emulating keystrokes, followed by
a carriage return.
Sync .net Now
The above WiFi and USB menus contain a Sync .net Now
option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
method (internet connection required). Alternatively, select Auto
Sync .net from within the USB connect menu to automatically
synchroniz e upon connection to a PC. Additional measurements
added to memory while connected are synchronized only when
the USB cable is disconnected and reconnected, or when the
Sync.net Now option is selected.
automatically attempt synchronization upon power-up.
NOTE:
Bluetooth
Allows communication with a smart device running the
PosiTector App (pg. 9) via auto-pairing Bluetooth (BLE)
wireless technology.
Sync Batches
Select batches to flag them for synchronization to the PosiTector
App. Sync Batches is useful when connecting a new device to
a gage with pre-existing batches, since only batches created
while Bluetooth is enabled are automatically selected. Selected
batches are synchronized when the next reading is taken in a
batch flagged for synchronization, or when the Sync Batches
option is selected at the bottom of the list of selected batches.
(Advanced models only)
(Advanced models only)
(Advanced models only)
10
WiFi connected gages