Werbung
Lowering the lift
Make sure that the safety area is clear of people and objects.
Raise the platforms slightly by pressing the LIFT button to deactivate the mechanical safety catches.
Press the Lower button: the lift takes a few seconds to release the safety devices and then begins to lower
under its weight and the raised load.
Press the Lower button until the platforms are lowered to the safety height.
Press the Lower button again at the safety height until the platforms are fully lowered. A warning beep sounds
during this process.
Raising the wheel-free jacks
Place the rubber blocks under the pick-up point on the vehicle.
If necessary: Adjust the lift table extensions according to the vehicle to be lifted.
Ensure that the vehicle is secured.
Set the selector switch to the position
Press the Lift button to raise the vehicle to the desired height.
By releasing the Lift button, the wheel-free jacks are brought to the standing position at the desired height.
Press the Lock-Up button to activate the mechanical locks.
Lowering the wheel-free jacks
Make sure that the safety area is clear of people and objects.
Raise the wheel-free jacks slightly by pressing the Raise button to release the mechanical locks.
Press the Lower button: It takes a few seconds for the lift to release the safety catches and begin to lower
under the weight.
Press the Lower button until the wheel-free jacks are fully lowered.
3.3
Manual lowering
In the event of an emergency (power failure), the lifting platform can be lowered manually to its starting position.
.
115
Werbung
