Herunterladen Inhalt Inhalt Diese Seite drucken

Canon PIXMA PRO-1 Inbetriebnahme Seite 26

Inhaltsverzeichnis

Werbung

For Mac OS X v10.4.11 to v10.5
Sous Mac OS X v10.4.11 à v10.5
Für Mac OS X v10.4.11 bis v10.5
Per Mac OS X v10.4.11 a v10.5
Install the software (the printer driver and IJ Network Tool) stored on the Setup CD-ROM by
following 1 to 3 below.
1. Insert the Setup CD-ROM into the computer's CD-ROM drive.
2. Open the Mac OS X 10.4.11 - 10.6.7 folder.
Install the software suitable for your operating system.
3. After the installation, perform Print Head Alignment.
For details, refer to Manual.html in the Manual folder in the Mac OS X 10.4.11
- 10.6.7 folder.
Installieren Sie die Software (den Druckertreiber und IJ Network Tool), die sich auf der
Installations-CD-ROM (Setup CD-ROM) befindet, indem Sie die im folgenden aufgeführten Schritte
1 bis 3 befolgen.
1. Legen Sie die Installations-CD-ROM (Setup CD-ROM) in das CD-ROM-
Laufwerk des Computers ein.
2. Öffnen Sie den Ordner Mac OS X 10.4.11 – 10.6.7.
Installieren Sie die für Ihr Betriebssystem geeignete Software.
3. Führen Sie die nach der Installation eine Ausrichtung des Druckkopfs durch.
Weitere Informationen finden Sie unter Manual.html im Ordner Manual im
Ordner Mac OS X 10.4.11 – 10.6.7.
Installez les logiciels (le pilote d'imprimante et IJ Network Tool) enregistrés sur le CD-ROM
d'installation en suivant les étapes 1 à 3 ci-dessous.
1. Insérez le CD-ROM d'installation dans le lecteur de CD-ROM de l'ordinateur.
2. Ouvrez le dossier Mac OS X 10.4.11 - 10.6.7.
Installez les logiciels adaptés à votre système d'exploitation.
3. Après l'installation, effectuez l'alignement de la tête d'impression.
Pour plus de détails, reportez-vous au fichier Manual.html dans le dossier
Manual du dossier Mac OS X 10.4.11 - 10.6.7.
Installare il software (il driver della stampante e IJ Network Tool) memorizzato sul CD-ROM di
installazione (Setup CD-ROM) seguendo i passaggi da 1 a 3 sottostanti.
1. Inserire il CD-ROM di installazione (Setup CD-ROM) nell'unità CD-ROM del
computer.
2. Aprire la cartella Mac OS X 10.4.11 - 10.6.7.
Installare il software adatto per il sistema operativo in uso.
3. Al termine dell'installazione, eseguire l'allineamento della testina di stampa.
Per ulteriori informazioni, vedere Manual.html nella cartella Manual all'interno
della cartella Mac OS X 10.4.11 - 10.6.7.


Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis