LaserLiner DampFinder Compact Bedienungsanleitung Seite 16

Remove the battery(ies) before storing for longer periods.
Store the device in a clean and dry place.
Calibration
The measuring device should be calibrated and tested on
a regular basis to ensure it is accurate and working properly.
We recommend the measuring device is calibrated every
1 - 2 years. If necessary, contact your distributor or the
UMAREX-LASERLINER service department.
Technical data
Measured variable
Mode
Measuring range wood
Accuracy (absolute)
wood
Measuring range
building materials
Accuracy (absolute)
building materials
Power supply
Operating time
Operating conditions
Storage conditions
Dimensions (W x H x D) 58 x 155 x 38 mm
Weight
Technical revisions reserved. 24W27
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according
to the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at:
https://packd.li/ll/apq/in
16
EN
Moisture content of material
(resistive)
Ambient temperature
Wood (2 groups), Building
materials (8 materials), Index
Wood group A: 5.6% ... 55.4%
Wood group B: 7.3% ... 63.3%
± 1% (5% ... 30%)
± 2% (<5% and >30%)
0% ... 38%
± 0,15% (0% ... 10%)
4 x 1.5V LR03 (AAA)
approx. 700 hours
0°C ... 40°C, max. humidity 85% rH,
no condensation, max. working
altitude 2000 m above sea level
-10°C ... 70°C,
max. humidity 85% rH
183 g (incl. batteries)