Optional Add-On; Troubleshooting - Ispring Rcc Serie Installationsanleitung & Benutzerhandbuch

Automatic Filter Replacement Reminder (Model #AFLT4)
Tailored for the iSpring RCC series, the AFLT4 reminder sends out alerts when it is time to
replace each lter and helps keep the puri cation system at its peak performance.
Water Filtration System Slide-out Mounting Kit (Model #ASKRCC)
Sliding rail works seamlessly with the RCC series and enables a easier lter replacement
experience.
TDS Test Meter (Model #TDS2 or TDS3)
Use a TDS test meter to check tap water quality or to determine your lter replacement status.
Tubing (Model #T14B or T14W)
1/4'' food-grade tubing in a 50' roll is good for tubing replacement and extension.
iSpring Tanks
This RO system can be used with a storage tank of 20 to 200 gallons. A tank helps meet the
impulsive high-volume demand and build a commercial or whole-house Reverse Osmosis
solution.
Ice Maker Connection Kit (Model #ICEK)
The iSpring Ice Maker Connection Kit can be purchased separately to feed RO water to your
refrigerator or water dispenser for crystal-clear ice cubes and great-tasting water.
Trouble
No water output
from the drinking
faucet
Water is not
lling the tank
20

Optional Add-on

Troubleshooting

Possible Issue
a. No Water supply.
b. No Power supply.
c. Incorrect installation.
d. Crimped tubing stopped
the water ow.
a. Incoming water pressure
is below 45 psi.
b. Incorrect installation.
c. Tank valve (ABV2K) is
closed.
Possible Solution
a. Turn on the water supply valve.
b. Check if your power adapter is plugged into an
outlet. See if there is a switch to turn on for the
power supply.
c. Verify all tubing connections.
d. Check and un-crimp all tubing.
a. Install a booster pump to increase the incoming
water pressure; contact iSpring customer service
for assistance.
b. Check all tubing connections.
c. Make sure the tank valve is open.