Setting up the outdoor sensor
DANGER of severe injuries
− During wall installation, there must be
The wireless outdoor sensor is equipped with a hanging
eyelet on the rear side.
− Place or hang the outdoor sensor at a position where
it is protected from the direct influence of the weath-
er (rain, sun, wind, etc.).
Suitable locations are, for example, under an awning
or in a carport.
Use additional wireless sensors
The base station is supplied with a wireless sensor. How-
ever, you can operate it with up to three outdoor sensors.
Please contact service@ade-germany.de for more infor-
mation or a paid order.
The outdoor sensors can be situated in different
spaces or outdoors.
Every sensor must be allocated its own number (= no.
of the transmission channel).
62
no electrical cables, gas or water pipes
installed in the walls at the mounting site.
Otherwise, when drilling holes, there is a
risk of electric shock!
Weather station WS 2302 | WS2402-1