Herunterladen Diese Seite drucken

EMPHASER MONOLITH ECP-M6 Edition 2 Anleitung Seite 11

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

NOTES ON PRODUCT SAFETY
Safety guidelines for audio products:
This product can reproduce loud and high-pitched sounds. Prolonged exposure to
loud sounds can lead to permanent hearing loss. Use the device at the lowest possible
perceptible volume. Read the safety instructions before using the product.
Set the volume control to the lowest possible volume and slowly increase the volume to
a level that is comfortable for you.
Try to keep the volume as low as possible and avoid using the product in a noisy
environment.
Ringing in the ears may indicate that the volume is set too high.
If you experience discomfort or if you notice ringing in your ears, it is recommended that
you stop using the product immediately and consult a doctor if necessary.
Warning: Pacemakers
Magnets can affect the function of pacemakers and implanted defibrillators. If you wear such devices,
ensure that you keep a sufficient distance. Warn wearers of such devices if necessary.
Warning: Strontium Ferrite Magnet
This speaker model uses or contains a strontium ferrite magnet:
Depending on the type of construction, strontium-ferrite magnet drives can exhibit strong
magnetic fields with high field strengths and pose a danger to other electronic
devices in the vicinity, such as PCs, laptops, magneto-optical hard disks, credit and
EC cards, mechanical watches, etc., which may be impaired in their function or destroyed.
Care should be taken to keep a sufficient distance from such objects.
Objects made of iron or objects with components made of iron or steel are strongly attracted
to the magnetic drive. Avoid tools, knives and other sharp objects in the vicinity of the loudspeaker.
Ferrite magnets are brittle and can break or splinter in the event of an uncontrolled impact.
The splinters are very sharp-edged and can be thrown meters away (danger to eyes).
Warning: Fire hazard
The voice coil of the loudspeaker or components of the supplied crossovers can become very hot in the event of an
electrical overload due to the amplifier power being set too high, damage to the loudspeaker or a short circuit due to
improper installation. If you suddenly notice a strong foreign odor that smells like burnt plastic and/or slightly "fishy",
switch off the audio system immediately and check the car audio installation.
11

Werbung

loading