Sony RMM-950 Installationsanleitung Seite 16

4 Attach the handle brackets to the VTR.
Attach one bracket with the mark "R' upward to the right side of the VTR and
attach the other one with the mark "L'' upward to the left side as follows:
1) Temporarily fit a screw to the slotted hole of the bracket.
2) Attach the bracket.
3) Secure the bracket by first tightening the screw at the round hole and then the
screw which has been temporarily fitted at the slotted hole.
r
Screw(B4 X 8)
ey
Slotted hole
Bracket
_,
5 Attach the handles.
(— —
Screw (B4 x8)
Handle
6 (E)