Intex ECO5220 Bedienungsanleitung Seite 6

(329IO) MODEL ECO5220/5230 & 6220/6230 SALTWATER SYSTEM WITH E.C.O. ENGLISH 7.5" X 10.3" PANTONE 295U 05/23/2024
SETUP INSTRUCTIONS
• The Saltwater System requires a separate filter pump [700~3200 gph (2650~12112 lph)]
to drive the water and function properly.
• The Saltwater System must be installed as the last piece of pool equipment in the
water return line to the pool as displayed in Drawing #1. This location extends the life
of the titanium plates.
1. Assemble the above-ground-pool (AGP) and its filter pump according to their installation
instructions.
2. Take the Saltwater System and its accessories out of the packaging.
3. Place the Saltwater System in line after the filter pump.
4. Connect the connector hose (7) to the Saltwater System inlet.
Connecting the system to pump and pool with 1-1/4" (32mm) connections/hoses:
The saltwater system features 1-1/2" (38mm) connections. It is accordingly supplied with
adaptors A (1) and B (8) for connecting to the small 1-1/4" (32mm) diameter connections/
hoses. Install as follows:
Drawing #1
WATER TO
POOL
ID 1-1/4" (32mm)
HOSE
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
1
SAVE THESE INSTRUCTIONS
IMPORTANT
SWIMMING POOL
8
English
WATER FROM
POOL
FILTER
PUMP
ID 1-1/4" (32mm)
HOSE
7
8
Page 6
329
A