Panasonic CF-VEBU06W Bedienungsanleitung Seite 6

ENGLISH
Precautions
Do not place metal objects or containers of liquid on top of the Mini Port Replicator.
If paper clips, coins, or other metal objects, or water or other liquid spills, get inside the
Mini Port Replicator, fire or electric shock may result.
Immediately unplug the AC cord and remove the Mini Port Replicator from the computer.
Then, contact your technical support office.
If these malfunctions occur, immediately unplug the AC cord and remove the Mini
Port Replicator from the computer.
• The computer is damaged
• A foreign object is inside computer
• Smoke is emitted
• An unusual smell is emitted
• The computer is unusually hot
Continuing to use the Mini Port Replicator while any of the above conditions are present
may result in fire or electric shock.
If these malfunctions occur, immediately unplug the AC cord and remove the Mini Port
Replicator from the computer. Then, contact your technical support office.
Do not touch the Mini Port Replicator and cable during an electrical storm.
Electric shock may result.
Do not connect a telephone line, or a network cable other than the one specified, to
the LAN port.
If the LAN port is connected to a network such as the ones listed below, a fire or electric
shock may result.
• Networks other than 100BASE-TX or 10BASE-T
• Phone lines (IP phone (Internet Protocol Telephone), conventional external telephone
lines, internal phone lines (on-premise switches), digital public phones, etc.)
Avoid Liquids, Humidity, Dust and Oil smoke.
Continuing to use the Mini Port Replicator while any of the above conditions are present
may result in fire or electric shock.
Do not leave the Mini Port Replicator in the car under flaming sun for a long period
of time.
The heat may damage the container and some parts inside the Mini Port Replicator.
Continuing to use the Mini Port Replicator under such a condition may cause a short
circuit or insulation malfunction etc, which may result in a fire or electric shock.