Rear Spacers; Door Reversibility - Electrolux EUF2907AOW Benutzerinformation

7.5 Rear spacers

7.6 Levelling

7.7 Door reversibility

1
3
2
4
• Install the two spacers and the locking
pins provided within the accessory bag
as shown in the figure.
• Install the spacer at the back of the ap-
pliance. Insert the locking pin.
When placing the appliance ensure that it
stands level. If necessary adjust the feet
using the adjustment spanner supplied.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power.
• Remove the ventilation grille. Remove
the upper filling and install it on the op-
posite side of the grille.
• Remove the pedal hole cover and install
the cover provided in the accessory
bag on the opposite side.
• Lay down the appliance back side
down on a wooden support.
• Unscrew the hinge (1) and remove the
cover plate (2) and the support (3).
• Remove the cover (4) on the opposite
side and install the support (3) the cover
plate (2) and the hinge (1). Install the
cover (4) on the opposite side.
ENGLISH 31