Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All installation and repair should be done by a qualified professional. This
unit should be inspected annually and cleaned regularly. It is imperative to
keep the control compartment, burners and circulation airways of the
appliance clean.
Inspect all elements of this heating unit before each use. lf there is
damage, the burner must be replaced.
Be aware of the hazards of high temperatures and stay away from the
unit to avoid any burns or injury.
The gas supply tank should be constructed and marked with the
specifications for the Propane gas tanks of the U.S. Department of
Transportation or the National Standard of Canada CAN/CSA-B339.
Propane gas tanks, spheres and tubes for Transportation of Dangerous
Goods; and Commission.
The Propane gas tank must have a listed over filing prevention device
and a QCCl or Type l,(CG4810)Propane gas tank connection.
This heating appliance should not be used on plastic or artificial wood
decks.
Be alerted to the hazards of high surface temperatures and should stay
away to avoid burns or clothing ignition.
Clothing or other flammable materials should not be hung from the
appliance or placed on or near the appliance.
Any guard or other protective device removed for servicing the appliance
shall be replaced prior to operating the appliance.
NOTE: You must follow all steps to properly assemble this heating
item. Make sure the gas valve is turned "OFF" before assembling. Do
NOT attempt to assemble without proper tools.
BE CAREFUL: WHEN CERTAIN MATERIALSORITEMS ARE STORED
ABOVEBESIDE ORUNDER THIS HEATER WHILE IN USE,THEYWILL
BE SUBJECT TO RADIANT HEAT ANDCOULD BE SERIOUSLY
DAMAGED.
Combustible materials should not be within 47.3 inches of the top of the
unit, or within 47.3 inches around the entire unit.
SAVE THESE INSTRUCTIONS
- 5 -
Werbung
