VEVOR PYRAMID SQUARE Bedienungsanleitung Seite 10

2-2. Remove the 3 screws from the Middle Plate(J) and assemble the
Control Box Assy(K) onto the Middle Plate with the 3 screws.
2-3. Hook the bottom plate to the anchor holes on the bottom part of
Lower Support(L) and secure with 4 screws(GG).In the same way, hook
the Middle Plate(J) to the anchor holes on the upper part of the Lower
Support and secure with 4 screws(DD).
Note:The side of control knob&igniter button should be place opposite to
the wheel assembly side.
Hardware Used
- 9 -