Type Of Spraying System Installation; Ring Plant - Stocker Geyser Pro Benutzerhandbuch

Art. 415 – Geyser Pro

4.3 Type of spraying system installation

The Geyser Pro allows the creation of spraying systems in two main configurations: ring system
and linear system. The choice between the two solutions depends on the conformation of the
area to be treated and the operating objectives. Both configurations must comply with technical
specifications for pipe diameter, nozzle spacing and non-return valve positioning.

4.3.1 Ring Plant

The loop system involves closing the circuit along the perimeter of the area to be treated. This
configuration is highly recommended as it allows an even distribution of pressure along the entire
spray line, even in the presence of long or articulated paths.
Initial section: use 8 mm pipe (outside diameter) for the first 25-30 metres in order
1.
to ensure high flow and pressure in the main sections.
Subsequent sections: continue with 6 mm tubing (outside diameter) for the end
2.
section, after reduction by means of quick-release couplings.
Spray nozzles: they must be installed with a spacing of 4 metres, thus ensuring
3.
optimal coverage of the area.
Non-return valves: required on sloping sections to prevent drips and ensure efficient
4.
product consumption.
Advantages of the ring system
manual
Contact: info@stockergarden.com
Newsletterwww.stockergarden.com/eventi-servizio/newsletter
REV 1.0
17