Functional Testing - Stocker Geyser Pro Benutzerhandbuch

Art. 415 – Geyser Pro

4.7 Functional Testing

After completing all the installation steps of Geyser Pro and logging in via the MyGeyser app, you
can proceed with an initial function test to check:
the correct flow of water in the pipes;
1.
correct spray delivery through the nozzles;
2.
that the pipe has no leaks or other connection problems.
3.
Carry out a visual inspection of the nozzles to ensure that atomisation is uniform.
Check carefully that there are no water leaks, unwanted backflows or drips throughout the
system.
Check the status of the MyGeyser application and ensure that the LED displays on the device
indicate correct operation.
manual
Contact: info@stockergarden.com
Newsletterwww.stockergarden.com/eventi-servizio/newsletter
REV 1.0
22