Device Installation And Environmental Protection; Led Error Displays And Their Meaning; Note On Liability - Stocker Geyser Pro Benutzerhandbuch

Art. 415 – Geyser Pro
Proper storage, dosing and mixing
Chemicals should be stored in a dry place, away from direct sunlight and heat sources, always
following the manufacturer's instructions. Dilution must be carried out according to the
specifications on the product label. Only water-dilutable concentrates are compatible with the
Geyser system.
Operator safety in case of accidental contact
In the event of skin contact, accidental inhalation or improper handling of liquids, it is essential to
consult the safety data sheets (SDS) of the products used. Always wear personal protective
equipment (gloves, goggles, face mask) during refilling and maintenance.

2.5 Device Installation and Environmental Protection

Geyser Pro must be protected from rain, snow and extreme sunlight. Installation in well-ventilated
and covered areas is recommended.
Not on or near:
 Free flames
Highly heated surfaces

Direct access by children or animals

Liquids must not be stored in the appliance at freezing temperatures.
Dispose of product residues and old components in accordance with local environmental
regulations.

2.6 LED error displays and their meaning

Error codes and LED displays are described in detail in Chapter 7.
The front display provides information on the operating status:

on the liquid level

on the connection

on nutrition

on any malfunctions or errors

2.7 Note on liability

Failure to observe these safety instructions may result in damage to the device, risks to people's
health and loss of warranty claims. The manufacturer accepts no liability for damage caused by
improper use or unauthorised modifications.
manual
Contact: info@stockergarden.com
Newsletterwww.stockergarden.com/eventi-servizio/newsletter
REV 1.0
9