AEG BP7614000 Benutzerinformation Seite 23

5. Touch
– P1 1:30 for a low degree of dirt
– P2 2:00 for a usual degree of dirt
– P3 2:30 for a high degree of dirt.
Touch
You can use the End function to delay start of the cleaning process.
During the Pyro cleaning the door is locked. The symbol
tor come up, until the door unlocks again.
The door unlocks when temperature inside the oven is under safety condition and Pyro
cleaning is finished.
During pyrolytic cleaning the lamp is off.
Cleaning reminder
To remind you that the pyrolytic cleaning is necessary the cleaning reminder symbol flashes
in the display
The cleaning reminder goes off from the display:
• After end of the pyrolytic cleaning function
• When you deactivate it in the Settings menu (refer to "Settings menu")
Telescopic shelf runners
You can remove the telescopic runners to clean the side walls.
Removing the telescopic runners
1. Pull the front of the telescopic runners
away from the side wall.
2. Pull the telescopic runners from the rear
side of the wall and remove the telescopic
runners.
or to set the duration of the cleaning procedure:
to confirm.
after every deactivating the appliance for the next 10 seconds.
Care and cleaning
and the bars of the heat indica-
2
1
23