AEG BP7614000 Benutzerinformation Seite 15

3. Use
4. Touch
5. Use
If you touch
the END function.
6. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
7. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven function and temperature.
2. Touch
flashes in the display.
3. Use
firm.
4. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
6. Deactivate the appliance.
Setting the SET+GO
To start of the appliance with necessary settings with only one touch of the sensor field,
any time later.
1. Set an oven function (or programme) and temperature (refer to "Setting the oven func-
tion" and "Changing the oven temperature").
2. Set DURATION (refer to "Setting the DURATION").
3. Touch
4. Touch
The display shows
ted.
5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function.
You can use SET+GO function only if DURATION is set.
Setting the Time delay function
DURATION
and off automatically later. In this case first set DURATION
(refer to "Setting the DURATION" and "Setting the END ").
When the Time delay function is activated the display shows static symbol of the oven
function,
Residual heat display.
or to set minutes for DURATION.
to confirm
or to set hours for DURATION. After 5 seconds the appliance starts.
or during setting hours for DURATION, the appliance goes to setting of
again and again until the display shows
or to set END (first you set minutes and then hours) and
again and again until
to set the SET+GO function.
and
and END can be used at the same time, if the oven is to be switched on
with a dot and . The dot shows which clock function is on in the Clock/
will flash in the display.
with a dot. This dot shows which clock function is activa-
Clock functions
.
or
and then END
15
to con-
function