Setting Up The Audio Options; Setting Up The Display Options - Samsung DTB-D700F Bedienungsanleitung

SETUP FUNCTIONS (DVD)

5.3 Setting Up the Audio Options

Using the Display Options with the unit in Stop mode, press
the DISPLAY key. Select Audio Setup using
Use the / keys to select the sub item.
• Dolby Digital
- PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog Audio
Outputs.
- Bitstream: Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio
Output.
N N o o t t e e : Be sure to select the correct Digital Output or no audio
will be heard.
• MPEG
- PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog Audio
Outputs.
- Bitstream: Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio
Output.
• DTS
- On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
- Off : Doesn't output digital signal.
• Dynamic Compression
- On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHz.
- Off : If the disc is copy protected, the output will be 48KHz.
If not, the output will be 96KHz.
• PCM Down Sampling
- On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the 96KHz
signals will be down converted to 48KHz.
- Off : If the disc is copy protected, the output will be 48KHz.
if not, the output will be 96KHz.
Then press the OK key to select the desired item.
N N o o t t e e : Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
GB-42
/ keys, then OK key.
D T T R E C E

5.4 Setting Up the Display Options

Using the Display Options with the unit in Stop mode, press the DISPLAY key.
Select Display Setup using the
Use the / keys to select the sub item.
• TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
- 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
- 4:3 Letterbox :
Select when you want to see the total 16:9 ratio screen.
DTB-D700F supplies, even though you have a TV with
a 4:3 ratio screen. Black bars will appear at the top and
bottom of the screen.
- 4:3 Pan-Scan :
Select this for conventional size TVs when you want to
see the central portion of the 16:9 screen.
(Extreme left and right side of movie picture will be cut off.)
• Screen Messages
Use to turn on-screen messages On or Off.
• Front Display
Adjust the brightness of the unit's front panel display.
- Dim for playback : Makes the Front Panel Display dim
- Dim
- Bright
• Screen Saver Time
This Screen Saver Time (2min, 10min, 30min or never) should
be set because the CRT or LCD panel of TV or a monitor may
be damaged while the picture is paused.
• Audio Screen Saver
This Audio Screen Saver (on or off) should be set because the
CD or MP3 mode screens are fixed and it may cause the
CRT or LCD panel of TV or a monitor to be damaged.
• SCART Output
Select the SCART output type. (RGB or Composite)
Then press the OK key to select the desired item.
I V E R / D V D P L A Y
SETUP FUNCTIONS (DVD)
/ keys, then OK key.
automatically when playing a DVD.
: Makes the Front Panel Display dim.
: Makes the Front Panel Display bright.
GB-43
E R