Change Pin Code; System Setup; Language Selection; Osd Setting - Samsung DTB-9401F Gebrauchsanweisung

OPERATING THE RECEIVER

3.2 Change PIN Code

To change the PIN Code, select the second option
"Change PIN Code".
This will take you to the following menu:
In this option, you need to enter the current PIN Code at the first
cursor, and at the second cursor enter the desired PIN Code.
To confirm, you need to enter the new PIN Code again.
Please remember the PIN Code should be a 4 digit numerical
value.
THE FACTORY PRESET PIN CODE : 0 0 0 0.
N N o o t t e e : If you forget the PIN Code, contact your dealer or service provider.
Once you change password, please do not forget and keep well.
GB-24
D I G I T A L T E R R E S T
OPERATING THE RECEIVER

4. System Setup

This option enables you to change the factory preset system
settings as per your requirements.

4.1 Language Selection

The "Language Selection" option allows the user to select
the desired language of the OSD, Soundtrack, Teletext,
Subtitle or EPG.
● To accommodate user from different regions speaking
different languages, OSD languages are available 18
languages.
● To select the desired language menu, press the
to change language and press the OK.
● The OSD Language, Soundtrack, Teletext, Subtitle, or EPG
will vary according to the selected language.

4.2 OSD Setting

You can set the OSD transparency and the display time.
● Select OSD Transparency level.
The OSD Transparency level from 0 to 100%.
Setting is made with the numeric keys,
or Pg+/Pg- keys.
/ keys : Setting in increment of 1%.
Pg+/Pg- keys : Setting in increment of 10%.
●
Set the display duration of the information(banner)
box displayed in the screen.
The time ranges from 0.5 to 60.0 seconds.
Setting is made with the numeric keys,
/ keys : Adjusting in increment of 0.5sec.
Pg+/Pg- keys : Adjusting in increment of 1 sec.
R I A L R E C E I V E R
/ keys
/ keys
/ keys or Pg+/Pg- keys.
GB-25