Selve commeo Multi Send BASIS Betriebsanleitung Seite 152

PREMIUM version
17.9.7. Editing device parameters
Setting or changing wind sensitivity
To adjust the wind sensitivity on drives with integrated wind detection (e.g. SE Breeze-com),
select the corresponding drive in the "Devices" menu. Perform the setting via the device
parameters.
Select the "Devices" sub-
menu using the movement
buttons (up) and
(down). Select the required
drive using the movement
buttons (up) and
(here: SE Breeze-com). Con-
firm the selected drive by
pressing the right display
button .
The submenu currently con-
tains only the "Wind sensitiv-
ity" menu item, so this is
automatically selected. Press
the right display button
to confirm the menu item.
Select the required drive
using the movement buttons
(up) and
SE Breeze-com). Confirm the
selected drive using the STOP
(down) button.
Set the required wind sensi-
tivity from 1 to 5 with the
channel selection buttons
or .
1 = high wind sensitivity.
5 = low wind sensitivity.
Press the right display button
to confirm the menu
item.
Select the "Device param."
menu item using the move-
(down) (here: ment buttons
(down). Confirm the menu
item using the STOP button.
The successful changing of
the wind sensitivity is con-
firmed.
Press the right display button
play button
to return to operation.
152
(up) and
once and the left dis-
four times