Selve commeo Multi Send BASIS Betriebsanleitung Seite 101

General section (BASIS and PREMIUM)
13.9.2. Menu item "Configuration"
Determining the receiver application
Use the or buttons to
select "Configuration", then
press the right display button
.
Note: You can find more information about the receiver application in the instructions for the
respective drives/receivers.
Activating or deactivating drive/receiver functions
Use the or buttons to
select the required receiver
application, then press the
right display button
confirm. Press to
return to the SELECT menu.
Use the or buttons to select the required function, then
switch it on or off using
= function switched off
= function switched on
Attention: The number and type of functions depend on the
receiver.
Press the right display button
to return to the SELECT menu.
101
Selectable receiver applica-
tions:
Type 00: Blind, interior
Type 01: Blind, exterior
Type 02: Awning/screen,
interior
Type 03: Awning/screen,
exterior
Type 04: Commercial awning
to
Type 05: Roller shutter
Type 06: Window drive
or .
to confirm and press
EN