Selve commeo Multi Send BASIS Betriebsanleitung Seite 140

PREMIUM version
17.6. Messages
In the main menu, use the movement buttons
menu, and press the right display button
menu without saving.
17.6.1. Activate push messages
17.6.2. Read push message
Use the movement buttons
push message has a consecutive number.
Message
Overload
Obstacle
Timer
Not possible
Radio/wireless
Sensor
Wind
Alarm
17.6.3. Delete push messages
Note: All messages are always deleted together.
The term push message refers to the letter symbol on the start
screen. You can activate/deactivate this message.
Select the "Push message" menu item using the movement buttons
(up) and (down). Use the channel selection button
vate the function
. Press the right display button
(up) and (down) to scroll through the push messages. Each
Meaning
The drive has detected an overload.
The drive has detected an obstacle.
A switching action was not executed.
A manual action with the movement buttons
not executed (e.g. end positions are not set).
The commeo Multi Send cannot reach the displayed commeo device
via radio.
There is a sensor loss.
The drive is in a "wind alarm" state.
The drive is in a general alarm state (not "wind alarm").
Select the "Delete" menu item using the movement buttons
and (down). Press the right display button
the right display button
(up) and (down) to select the "Messages"
to access it. Press
or deactivate it with
to confirm.
again to confirm the query.
140
to return to the main
to acti-
(up) and (down) is
(up)
to confirm. Press