Gallagher WIRED WIRELESS Anleitungen Seite 14

Connecting the Wireless Load Bars to a W-1 or TW scale
1. On your scale, select
bars
bars.
2. When located, select the wireless load bars and
Note: The connection process will take up to 30 seconds while pairing
between the load bars and the scale.
3. Once connected, select
to the scale, the Bluetooth® icon at the bottom of the screen is activated
and turns orange.
4. Create a new session, by selecting
weight will display as 0.0kg. If it's not 0.0, press the
some weight to the bars to confirm the connection is working.
Page 8
Settings > Equipment Connections > Load
Wireless
and choose
Done
3E1045 Gallagher Load Bar User Manual
. The scale will start searching for the load
. When the wireless load bars are connected
New > Quick Start
Connect
.
. The current
Zero
button. Apply