Lionelo Bastiaan i-Size Bedienungsanleitung Seite 16

1. Whi e holding the seat belt tension adjustment button, oosen the belts (fig. 12).
Pul the headrest adjustment lever and raise the headrest (fig. 21).
2.
3. Unzip the cover at he back of the seat (fig. 22).
Remove the belt oops f om the metal connection
4.
ever (fig. 24).
5. Put the upper part of the shou der belts through the corresponding
seat back (fig. 25).
6. Unfasten the seat belts (see: Fastening and unfastening seat belts).
Remove the seat belt buckle from the protective
of the belt through the corresponding
Place the removed seat belt components
8.
cover (fig. 27).
To reinstal the belts, fol ow the above steps in reverse order.
REMOVAL OF THE
To detach the SOFIX arms, push in the SOF X sliding evers on both sides. The indicator
on the SOF X button
REMOVAL OF THE SEAT - TOP TETHER
Unfasten the Top Tether belt from the anchor points in the car. Loosen the belt. The
Indicator will turn red.
SEAT TILT ADJUSTMENT
To adjust the seat ti t, press the tilt adjustment lever (8, fig. B) and move the seat to the
desired position.
The seat has 4 levels of ti t adjustment in the forward-facing
facing position, place the seat in the semi-reclining position (position "1").
SEAT ROTATION
Press the seat rotation button (13, fig. B), then adjust the seat to the rearward or forward
facing position. Try to move the seat, properly anchored will not al ow you to change position.
REMOVING AND
Unzip the cover and slide it comp ete y off the seat body. To do this:
1. Adjust the headrest to the highest available position (see: Headrest adjustment).
EN
SEAT - ISOFIX
will turn red.
ATTACHING
plate (fig. 23) and the headrest
cushion. Then put the metal end
hole in the seat and remove the belt (fig. 26).
in the pocket ocated on the inside of the
position (fig. 20). n the rear
THE COVER
-16-
holes in the