HOMCOM 800-139 Bedienungsanleitung Seite 6

EN
OPERATING PROCEDURES &MAINTENANCE
UNPACKING YOURICEMAKER
1. Remove all packaging. Check the ice basket and scoop are included. lf anyparts are
missing, please contact our customer service.
2. Clean the inside with lukewarm water and a soft cloth. Take out the ice basket and
clean it.
3. Keep the appliance away from direct sunlight and other sources of heat (i.e.stove,
furnace, radiator). Place the ice maker on an even surface. Allow at least six inches of
space between the back and sides of the ice maker and the wall.
4. Allow one hour for the refrigerant liquid to settle before plugging in the ice maker.
5.Position the appliance so the plug is accessible.
WARNING: Fill with drinking water only.
lmproper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged please call our customer service
1. This unit should be properly grounded for your safety. The power cord of this appliance
is equipped with a three-prong plug that aligns with standard three-prong wall outlets
to reduce the risk of an electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Under
no circumstances, do not cut or remove the third (ground) prong from the power cord.
Any questions concerning power and/or grounding should be directed towards a
certified electrician.
3.This appliance requires a standard 220-240volt, 50Hz electrical outlet withthree-prong
ground.
CLEANING AND MAINTAINING YOUR ICE MAKER
Before using the ice maker, ensure it is cleaned thoroughly.
1.Take out the ice basket.
2. Clean the inside with diluted detergent, warm water and a soft cloth.
3.Then use the water to rinse the inside parts, and drain out the water by unplugging the
drain cap on the side.
4. Clean the outside of the unit regularly with a mild detergent solution and warm water.
5.Dry the inside and outside with a soft cloth.
6. When the machine is off, open the water drained cap to drain water from the reservoir.
DANGER
6