Silvercrest SESA 20 A1 Bedienungsanleitung Seite 12

Drying shoes
ATTENTION!
► Do not cover the appliance during operation.
Note
► The appliance is suitable for drying shoes from shoe size
34 (EU)/2 (UK). Pull out the heating elements 3 if necessary
(see Fig. 1).
Fig. 1
► The appliance is suitable for boots up to a shaft height of 50 cm.
► The appliance heats up to a maximum of 56°C during operation
and then keeps this temperature constant.
► Do not use the appliance for more than 9 hours continuously.
Ensure a sufficient supply of air.
Only use one heating element 3 per shoe.
►
Switch on the appliance and insert one heating element 3 into
♦
each of the shoes to be dried. Keep a distance of approx. 2 cm
from the toe of the shoe so that the warm air can circulate in
the shoe. After about 10 minutes, the appliance has reached its
maximum temperature of 56°C.
Leave the heating elements 3 in the shoes until they are dry.
♦
GB │ IE │ NI │
9 ■