Guiding The Power Cable (Fig. 5); To Lower The Upper Handle (Fig. 6); Grass Box Assembly (Fig. 7); Installing The Grass Box (Fig. 8) - Powerplus Powdpgbox24 Bersetzung Der Originalbetriebsanleitung

NOTE: If the lower handle (8) is loose or does not seat completely in the
slot, turn the lower handle locks clockwise to secure the handle.
11.1.3

Guiding the power cable (Fig. 5)

▪
Guide the power cable on top of the lower and upper handlebars using the supplied cable
clips (4).
Caution: the power cable (a) must always be positioned on top of the
handlebar. This provides free movement of the cable on top of the lower
section, when the handle is folded. Incorrect mounting of the cable could
lead to damaging and/or straining it, resulting in a malfunction of the
machine. In this case the guarantee is void.
11.1.4

To lower the upper handle (Fig. 6)

▪
Loosen the upper handle knobs (9) until the handle (10) can rotate easily.
▪
Fold the upper handle forward, the mower is now more compact for storage.
11.2

Grass box assembly (Fig. 7)

▪
The grass box (3) comes in 3 separate parts and needs to be assembled.
▪
Put the lower part (a) on a flat surface and fit the top part (b) in place.
▪
Make sure all connecting parts snap firmly together.
▪
Fit the handle (c) to the top part in the same way.
11.3

Installing the grass box (Fig. 8)

▪
Remove key (2) and battery pack (12).
▪
Lift the rear discharge door (18).
▪
Lift the grass box by its handle and place under the rear discharge door so that the hooks
on the grass box are seated onto the slots on the mower housing.
▪
Release the rear discharge door (18).
▪
Reinstall key and battery pack when you are ready to mow.

12 ASSEMBLY GRASS TRIMMER

The grass trimmer is supplied with some components not assembled. To assemble these
proceed as follows:
12.1

Mounting the guard (Fig. 10)

▪
Rotate and align the blade head (a) vertically with the trimmer head (27) so that the
protective guard (29) can fit over it.
▪
Slide the protective guard (29) in place on the trimmer head (27) , the open side of the
protective guard must face forward.
▪
Firmly push the protective guard (27) on to the cutter head until it snaps in place.
▪
Check that the protective guard is securely fastened.
Caution! During this operation beware of the cutting blade. You may be
wounded.
Caution! Never use the grass trimmer without the guard. It is vital for your
and other peoples' safety and for the good working order of the trimmer.
The failure to observe this safety regulation is not only dangerous but also
annuls the guarantee terms.
Copyright © 2024 VARO
POWDPGBOX24
P a g e | 12
EN
www.varo.com