Herunterladen Inhalt Inhalt Diese Seite drucken

General Power Tool Safety Warnings; Work Area; Electrical Safety - Powerplus Powdpgbox24 Bersetzung Der Originalbetriebsanleitung

Rasenmäher 20v 340mm + rasentrimmer 20v 240mm
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

6 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power
tool" in the warnings refers to your mains operated (corded) power tool or
battery operated (cordless) power tool.
6.1

Work area

Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
6.2

Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Copyright © 2024 VARO
Ambient temperature
40 °C max. (only for
battery).
Important information
Keep a minimum distance
of 15 m between the
machine and third parties
during use.
POWDPGBOX24
P a g e
| 6
Use battery and charger only
in closed rooms.
Electrical products must not
be disposed with the
domestic waste.
www.varo.com
EN
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Powdpg75561bPowdpg75415

Inhaltsverzeichnis