Brita PURITY Quell ST Handbuch Seite 45

The above listed Water Filter Systems have been tested and certified under NSF/ANSI 42 for reduc-
tion of chlorine, taste and odour. The performance of this product has been verified and substanti-
ated as the test data summarised below indicates. These substances may not be in your water.
Test Data
Substance Guidelines
Chlorine NSF/ANSI 42
Testing Conditions:
Flow Rate: 1,89 l/m pH: 7,28
Pressure: 414 kPa Temperature: 21 °C
Refer to your Instruction Guide for more specific product and warranty information and to avoid
contamination from improper handling and installation. Performance will vary based on local water
conditions. The substances reduced by this product are not necessarily in your water.
Buyer's Signature
This appliance meets the domestic water treatment appliance Standards AS/NZS 3497 and AS/NZS
4348 for the following water treatment process:
Class Treatment type
I Microbiological Status
Bacteriostatic
II Microbiological Treatment
Bacteria removal
Virus removal
Protozoa removal
III Turbidity and particulate reduction
IV Taste and odour reduction
V Chemical treatment
Legend:
= pass
N/A= Not Applicable
All manuals and user guides at all-guides.com
SUBSTANCE REDUCTION
Average Maximum
Influent Effluent
Concentration Concentration
2,1 mg/l 0,11 mg/l
Date Seller's Signature
Will remove or inactivate Crypto-sporidium and Giardia
Minimum Average
Percent Effluent
Removal Concentration
94,7 % 0,06 mg/l
Date
Function
Will stop bacteria increasing
Will remove or inactivate bacteria
Will remove or inactivate virus
Reduces cloudiness
Reduces tastes and odours
Decreases chlorine
Average
Percent
Removal
97,1 %
Pass
N/A
N/A
N/A
43