Brita PURITY Quell ST Handbuch Seite 44

Manufacturer
Brita GmbH
Heinrich-Hertz-Str. 4
6 232 Taunusstein
Germany
+49-(0) 6128-746-0
Tel +61 2 9486 4200
Fax +61 2 9486 4222
www.brita.com.au
• Minimum operating pressure: 2 bar
• Maximum operating pressure: 6,9 bar
• Do not allow exposure to temperatures
below 4 °C
• Maximum operating temperature: 30 °C
• Nominal flow rates:
• PURITY 450 Quell ST (100l/h)
• PURITY 600 Quell ST (100l/h)
• PURITY 1200 Quell ST (200l/h)
• This system must be installed according to
local plumbing codes on the cold water line.
• Replacement Cartridges
• PURITY 450 Quell ST (No. 1004138)
• PURITY 600 Quell ST (No. 1004136)
• PURITY 1200 Quell ST (No. 1004133)
• This system requires regular replacement of
the filter cartridge to maintain proper
operation. Varying scale, chlorine, sediment,
or organic substance levels may affect
replacement frequency.
42
All manuals and user guides at all-guides.com
ANNEX FOR AUSTRALIA
PRODUCTS
Water Filter Systems
PURITY 450 Quell ST (with and without MDU)
PURITY 600 Quell ST (with and without MDU)
PURITY 1200 Quell ST (with and without MDU)
USE GUIDLINES
Seller
BRITA Water Filter Systems
Distributors Pty Ltd
Professional Division
Suite 2 / Level 9
123 Epping Road
North Ryde, NSW 2113
Tel: +61 (0)2 9486 4200
Fax: +61 (0)2 9486 4222
professional@brita.com.au
www.brita.com.au
• Be sure to change the filter cartridge at least
as indicated in the capacity table (refer to
your Instruction Guide) or annually which
ever occurs first, or whenever you detect a
change in taste, odour, or a decrease in flow.
As an option the water filter system with
MDU (Measuring and Display Unit) can be
used, which assists in determining when the
cartridge must be changed.
• Please ensure that a backflow prevention
device, meeting the requirements of AS/
NZS 3500.1, is installed on the water supply
inlet to the filter unit
• Caution Do not use with water that is
microbiologically unsafe or of unknown
quality without adequate disinfection before
or after the system.