SOLIS 849 Gebrauchsanleitung Seite 28

DESCRIPTION OF LCD DISPLAY
1. This machine has five speed settings.
2. When the juicer is first plugged in, it goes into standby mode.
The LCD display lights up and shows the following information (Fig. 1).
Fig. 1
3. When the rotating switch is turned, the motor begins to run. The information shown in Figs. 2-6
appears in the LCD display as the rotating switch is moved in turn to settings 1-5.
Fig. 2
Fig. 5
4. The motor will not start if the clamp at the front of the juicer has not been secured properly.
A flashing «L» will then appear on the LCD display, as shown in Fig. 7. If the clamp at the back of
the juicer has not been secured properly, the LCD display will switch off and the juicer won't work.
Fig. 7
28
All manuals and user guides at all-guides.com
Fig. 3
Fig. 6
Fig. 4