Zendure AB3000X Bedienungsanleitung Seite 9

EN
Note: The package includes two sets of brackets. Repeat the steps on the other side of the device for dual-end
fixation, enhancing stability.
9. Firmware Update
Connect to SolarFlow 2400 AC
Upon first use, connect the AB3000X to the SolarFlow 2400 AC to check for and install any available firmware
updates.
Access the Settings:
Open the detail page for the SolarFlow 2400 AC, tap the Settings icon in the top-right corner to access the
Settings menu.
Check for Firmware Updates:
In the Settings menu, select Firmware Update to check the latest available update. If a new update is available,
click Update to begin the process.
Wait for the Update to Complete:
Do not navigate away from this page during the update process. The update may take several minutes to
complete.
Since the battery operates in conjunction with the SolarFlow 2400 AC, please refer to their user manuals for
detailed configuration settings.
Tips:
• Do not turn off the device during the firmware update.
• Do not disconnect any cables (including solar cables, battery connection, or the AC cable to the outlet) while
updating.
• Ensure the battery charge level is above 20% before starting the update to allow sufficient time for completion.
If the update fails, retry the update in the app or contact Zendure Customer Service.
In accordance with applicable laws and recreations, Zendure retains the final right to interpret this document and
all related product documents, including but not limited to warranty periods, eligibility for warranty services, and
other terms. Zendure also reserves the right to modify these documents in response to product updates.
This document is subject to change (including updates, revisions, or discontinuation) without prior notice. For the
latest product information, please visit Zendure's official website:
https://zendure.com/pages/zendure-global-warranty
9