Eureka PROMETHEUS Gebrauchsanweisung Seite 50

9.13.2 REPLACING THE GRINDERS AND FLAPS
Press the REPLACE button to manage the replacement of grinders and flaps.
Press the BURRS button to indicate the replacement and model of the
grinders. Select the size and type of grinders installed, then press the SAVE
button and confirm the replacement.
The counter is reset and the grinders status (100%) will be displayed on the
MAINTENANCE INFO screen.
When the FLAP button is pressed, the replacement of the flap must be
confirmed. The counter is reset and the flaps status (100%) will be displayed
on the MAINTENANCE INFO screen.
9.14 FIRMWARE
This screen allows viewing the firmware installed on the appliance. If an update
is available, the UPDATE button will be visible. Press the UPDATE button to
upload the latest firmware. After a few moments, a confirmation screen will
appear.
28